Pulleys are Wearing

[SteveW]

I finally have some time and I noticed my metal pulleys are wearing badly. Time to go plastic. Who do I contact to get them, and how hard are they to install?

[CROM]

Call up Sean at Jackson Racing.

Tell him what you need. If you haven't replaced your belts yet, you will probably want to do this at the same time. My belts wore out before my pulleys wore out, so your's are probably on their last leg.

They are not difficult to install, just take your time and make sure you put the belts on the right side of the tensioner pulleys when you get everything back together(you will know what I am talking about when you get there).

You will need to get under the car for the bottom one. They are easy.

hope that helps

[speedy108]

This may be off the subject a little but when my car sits at idle, there is a constant loud annoying sound from my supercharger or another pulley. I can't really explain the sound but if some of you can give some opinions on what it could be and how I could check it, then that would be great. Like I said, it is loud and it is always only at idle. Maybe as simple as a belt being to tight because my crank to alternater belt was loose and when I tightened it up, it became worse. But it still did it before we tightened the belt, just not as much.


Thanks for all the help.

[speedy108]

By the way,I got the supercharger from CKIM who use to post on here a lot. And my car is a '99 GSR with Jim's stepper pulley (9psi) and all the bandaids.